Required Host Support
Use a compatible 10G SFP+ port that supports 10GBASE-ZR optical transceivers.
Product Overview
The SFP+ optical transceiver supports a data rate of 10Gbps . It supports transmission distances up to 80km over Single-Mode Fiber (SMF) .
The transceiver uses a Cooled EML laser transmitter and a APD photodetector receiver.
Designed for optical Ethernet transmission over duplex fiber links in compatible SFP or SFP+ host ports.
Built for Reliable Optical Connections
Key specifications for 10GBASE-ZR SFP+ optical transceiver applications
10Gbps
10 Gigabit Ethernet
Designed for 10G optical Ethernet links using an SFP+ transceiver interface.
1550nm Single-Mode Fiber (SMF)
Fiber Transmission
Designed for 1550nm optical transmission over Single-Mode Fiber (SMF).
Up to 80km
Transmission Reach
Supports optical links up to 80km over compatible Single-Mode Fiber (SMF).
DDM / DOM
Digital Diagnostics
Supports digital diagnostic monitoring of optical power, temperature and module operating status.
Technical Specifications
| Parameter | Value |
|---|---|
| Data Rate | 10Gbps |
| Form Factor | SFP+ |
| Wavelength | 1550nm |
| Media Type | Single-Mode Fiber (SMF) |
| Connector | Duplex LC |
| Reach | 80km |
| Host Interface | SFP+ |
| Laser Type | Cooled EML |
| Receiver Type | APD |
| DDM / DOM | Yes |
| Operating Temperature | 0°C to +70°C |
Application Scenarios
Typical applications for extended-reach 10Gbps optical connections using single-mode fiber.
Data Center Interconnects
Designed for long-distance 10GbE connections between distributed data center facilities.
Enterprise Backbone Networks
Provides reliable high-speed backbone connectivity over single-mode fiber infrastructure.
Telecommunication Networks
Suitable for metro and access network applications requiring extended optical reach.
Connectivity Solutions
Typical network deployment scenarios using compatible optical transceivers and fiber connections.
Compatible Components
Connect two network switches using compatible optical transceivers and fiber cabling for reliable high-speed data transmission.
Compatible Components
Enable high-speed connectivity between network switches and servers through compatible optical transceivers and fiber cabling.
Compatible Components
Extend fiber networks to Ethernet devices using optical transceivers, media converters, and copper Ethernet connections.
Compatibility & Device Support
Compatibility requirements for 10GBASE-ZR SFP+ optical transceivers
Port Compatibility
A matching SFP+ form factor alone does not guarantee compatibility. Verify host-device support and vendor-specific transceiver requirements.
Cabling & Connection Guide
Recommended cabling path for 10GBASE-ZR SFP+ single-mode fiber links
Use a compatible SFP+ host and duplex LC single-mode fiber for extended optical links up to 80km.
Connection Path
SFP+ Host Port
10GBASE-ZR SFP+
Duplex LC
Single-Mode Fiber
Up to 80km
Quality Assurance & Validation
Quality Assurance
Products are inspected for workmanship, basic functionality, and consistency before shipment to support reliable deployment.
Warranty & Support
Warranty and technical support information for Sailtel transceivers.
Support Information
For warranty and technical support, contact Sailtel with the product part number and order details for assistance.
Q&A
Are these optical transceivers hot-pluggable? ⌄
Yes. These optical transceivers are designed for hot-pluggable operation in compatible SFP or SFP+ host ports.
Can this optical transceiver work with Cisco, Arista, Juniper, HPE, MikroTik, or Ubiquiti switches? ⌄
Compatibility depends on the exact network device model, required SFP or SFP+ form factor, supported data rate, optical standard, and transceiver coding. Please provide the exact device model so compatibility can be confirmed before ordering.
How do I check whether this optical transceiver is compatible with my switch? ⌄
Verify the required SFP or SFP+ form factor, supported data rate, optical standard, wavelength, fiber type, connector type, transmission distance, and any vendor-specific transceiver coding requirements. Please provide the exact device model if compatibility confirmation is required before ordering.
What is a ZR-class 10G SFP+ transceiver used for? ⌄
ZR-class 10G SFP+ transceivers are designed for long-distance 10GbE optical links over single-mode fiber. The exact supported reach depends on the selected model.
How do I choose between 80km, 100km, and 120km ZR SFP+ models? ⌄
Select the model according to the required link distance and optical link budget. Check the Reach and optical specifications of the exact product before ordering.
What fiber type should I use with a ZR SFP+ transceiver? ⌄
ZR-class SFP+ transceivers are designed for single-mode fiber links. Check the exact product specifications for the required connector and optical parameters.
Can a ZR SFP+ transceiver be used for short-distance links? ⌄
Check the optical power budget and receiver overload specifications before using a long-reach ZR transceiver on a short link. Optical attenuation may be required depending on the model and link conditions.
What parameters must match at both ends of a ZR optical link? ⌄
Both ends should use compatible data rates, wavelengths, fiber types, connector interfaces, and optical power budgets. Host-device compatibility and transceiver coding should also be verified.